BTWVY - AQUA PLASTIC VARNISH, 70-100
- MSDS: BTWVY
- Manufacturer: CORONADO PAINT CO
- Product Name: AQUA PLASTIC VARNISH, 70-100
- National Stock Number: 8010-00N044808
Product Identification
Product ID:AQUA PLASTIC VARNISH, 70-100
MSDS Date:04/08/1992
FSC:8010
NIIN:00N044808
MSDS Number: BTWVY
Responsible Party
EDGEWATER, FL 32132
US
Emergency Phone: 904-428-6461
Info Phone: 904-428-6461
Cage: 33200
Contractor
Telephone: 904-428-6461
Cage: 33200
Ingredients
ETHANOL, 2-(2-METHOXYETHOXY)-; (DIETHYLENE GLYCOL
CAS: 111-77-3
RTECS: KL6125000
Fraction By Weight: 5.6%
OSHA PEL N/K
ACGIH TLV: 30 PPM (MFR)
0.10
CAS: 57-55-6
RTECS: TY2000000
Fraction By Weight: 3.1%
OSHA PEL N/K
ACGIH TLV: 50 PPM (MFR)
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: CONTACT W/SKIN MAY CAUSE
IRRITATION OR RASH. EYES: MAY CAUSE SLIGHT IRRITATION OR REDNESS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:EYES-REDNESS. INGEST-NAUSEA.
Medical Cond Aggravated by Exposure:NONE KNOWN.
First Aid
First Aid:INGEST: INDUCE VOMITING AND CALL A PHYSICIAN @ ONCE. EYES:
FLUSH WITH WATER FOR AT LEAST 15 MINUTES AND CALL A PHYSICIAN.
SKIN:WASH AFFECTED AREAS WITH SOAP AND WATER. INHAL: REMOVE TO
FRESH AIR. SUPP ORT BRTHG (GIVE O*2/ARTF RESP) .
Fire Fighting
Flash Point:NONE @ BOILING
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE KNOWN.
Accidental Release
Spill Release Procedures:CLEAN UP WITH WATER BEFORE ALLOWING TO DRY.
SODIUM CHLORIDE OR CALCIUM CHLORIDE MAY BE SPRINKLED ON SPILL; THIS
MAY COAGULATE LATEX AND FACILITATE CLEANING WITH WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:AVOID PROLONGED OR REPEATED INHALATION
OF SPRAY MISTS. USE W/ADEQUATE VENTILATION.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:SHOULD PREVENT INHALATION OF SPRAY MIST/HEATED
VAPORS. USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE
OF CONCERN .
Ventilation:LOCAL EXHAUST AND GENERAL VENTILATION RECOMMENDED.
Protective Gloves:CHEMICAL RESISTANT PLASTIC/RUBBER.
Eye Protection:ANSI APPRVD CHEM WORK GOGGLES .
Other Protective Equipment:AS REQUIRED TO PREVENT SKIN CONTACT.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:212F,100C
Vapor Pres:SEE INGRED
Vapor Density:HVR/AIR
Spec Gravity:1.04(H*2O=1)
Evaporation Rate & Reference:<0.01(ETHER=1)
Solubility in Water:INFINITE
Appearance and Odor:WHITE MILKY LIQUID, SLIGHT ODOR OF AMMONIA
Percent Volatiles by Volume:71.6
Stability
Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:NONE KNOWN.
Hazardous Decomposition Products:AFTER WATER HAS EVAPORATED, POLYMERIC
BINDER CAN BURN TO PRODUCE CARBON MONOXIDE AND CARBON DIOXIDE.
Disposal
Waste Disposal Methods:INCINERATE OR DISPOSE OF IN SANITARY LANDFILL
I/A/W LOCAL, STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.